Verfahrensangaben

Simulation, design, fabrication, characterization, and certification of 22 planar shock-wave generators for experiments with the PRIOR-II proton microscope for FAIR.

22 planar shock-wave generators with an option of 6 further planar shock-wave generators

6 further planar shock-wave generators

The competent reviewing authority is
Vergabekammer des Bundes [transl.: Federal Public Procurement Tribunal]
Villemombler Straße 76
53123 Bonn
Tel.: 0228 9499-0
Fax: 0228 9499-163
Email: vk@bundeskartellamt.bund.de
Website: http://www.bundeskartellamt.de/SharedDocs/Kontaktdaten/DE/Vergabekammern.html
Candidate/ Bidder is requested to clearly identify those sections of the participation application (and eventually of the tender, if applicable) that contain a trade or busi-ness secret. If Bidder fails to do so, the Public Procurement Tribunal may, in the case of a review procedure, assume that Bidder has agreed to have these documents inspected (§165 para. 3 GWB). As Awarding Authority, FAIR is obliged to make the tender file available to the Public Procurement Tribunal immediately when initiating a review procedure (§ 163 para. 2 cl. 3 GWB).
Candidates/ Bidders have a right to expect the contracting authority's compliance with the Bidder-protecting provisions re: the tender procedure (§ 97 para. 6 GWB). If Candidate/ Bidder interested in the contract considers that Bidder's rights have been infringed through failure to comply with award regulations, the infringement must be reported to FAIR within ten calendar days (§ 160 para. 3 cl. 1 nr. 1 GWB).
Infringements identifiable on the basis of the announcement or the award docu-ments must be asserted against FAIR within the deadline for submission of applica-tions (or tenders) specified in the announcement (§ 160 para. 3 cl. 1 nr. 2 - 3 GWB).
If FAIR informs Candidate/ Bidder that FAIR is unwilling to redress its complaint, it is possible to file an appeal for review with the aforementioned Public Procurement Tribunal within 15 days of receipt of the notification (§ 160 para. 3 cl. 1 nr. 4 GWB).
Bidders whose tenders are not to be considered for the award will be informed prior to the award according to § 134 GWB. A contract may only be concluded 15 calen-dar days after this information has been sent by FAIR. In the case of transmission by fax or electronic means, this period shall be ten calendar days. It commences on the day after dispatch of the information by FAIR. After this period has expired, a sur-charge is possible, even if the deadline is not passed according to § 160 para. 3 GWB. An application for review would therefore have to be delivered to FAIR by the Public Procurement Tribunal before the expiry of the deadline according to § 134 GWB in order to prevent a surcharge.
According to § 135 para. 1 and 2 GWB, the ineffectiveness of a commission can only be established if it has been asserted in the review procedure within 30 calendar days of the conclusion of the contract but not later than six months after the conclusion of the contract. If the contracting entity has published the award in Amtsblatt der Europäischen Union [transl.: Official Journal of the European Union], the period un-enforceability shall end 30 calendar days after announcement of the publication of the award in Amtsblatt der Europäischen Union.
Information pursuant to Art. 13 GDPR on the processing of your personal data within the scope of our business relationship is available at:
www.gsi.de/data-protection

FAIR - Facility for Antiproton and Ion Research in Europe GmbH

Communication with Candidates takes place via the DTVP's tender platform. Questions must be sent to FAIR via DTVP and will are answered via DTVP. Questions posed orally or by telephone regarding the documents or the contractual object will not be answered; answers given orally or by telephone are not binding.

The only form of submission of participation applications accepted by Awarding Authority is in writing, electronically

Note: In Writing, Electronically

Evaltuation Criteria:
30% Price, 70% Performance Criteria: 40% Design parameters to be achieved in hydrodynamic simulation (initial proposal) (30% Planarity of flyer plate, 30% Tilt angle, 20% Utilization of the HE quantity limit, 20% Configurations for different velocities), 30% Performance & timing characterization of the HE generators (70% General characterization approach & methodology (accuracy), 30% Location of generator characterization), 20% Provision (50% Provision of the generators, 50% BAM certification of the generators), 10% Overall Concept

Participation applications shall be submitted electronically within the deadline via the German awarding platform DTVP.
URL: http://www.dtvp.de/Center/
The forms and other documents to be completed, provided by FAIR, may be
- either completed on the online tendering tool under the section "Documents to Be Completed" or
- created and compiled separately by Candidate together with the other components of the participation application or tender (concepts or explanations etc.), then uploaded under the heading "Own Documents".
However, Candidates should not fill in the forms online and upload them again separately, as this can result in transmission errors and increases the workload on both sides.
In order to comply with the text form (in writing) according to § 126b BGB [transl.: German Civil Code] when submitting participation applications, Candidates must provide the following information:
- In the case of natural persons, the full name (first name and surname) must be given (name of the declaring person in the participation application form).
- In the case of legal entities and commercial companies and corporations, the name of the company and its legal form must be stated. In addition, the full name of the employee who is submitting the participation application on behalf of the company (name of the declaring person in the participation application form) must be stated. The insertion of a company logo is not sufficient.
- In the case of Bidding Consortia, the declaring person according to § 126b BGB shall be the employee of the leading member who submits the participation application on behalf of the Bidding Consortium; besides, the form "Bidding Consortium Declaration" must be submitted.
It should be noted that in the case of electronic submission, the text form according to § 126b BGB is only observed if the participation applications are transmitted in encrypted form via the awarding platform (cf. information on eVergabe). Submitting the participation application via email is not sufficient.
In the case of incorrect/ incomplete information that violates the aforementioned formal requirements, participation applications will be excluded unless Candidate cannot be held responsible (§ 57 para. 1 nr. 1, para. 3 VgV).

GSI/FAIR reserves the right to make a one-off additional request for documents within a period to be specified in the additional request letter in accordance with § 56 VgV.
However, applicants cannot rely on a subsequent request. Ultimately incomplete requests to participate will be excluded (§ 57 Para. 1 No. 2, Para. 3 VgV).

Supporting documents:

* The participation request
** By means of self-declaration:
- Request to Participate for 35F/2600037239FAIR - Design and manufacturing of planar wave generators for PRIOR-II shock-wave experiments: General declaration of the person making the declaration within the meaning of Section 126b BGB (German Civil Code -BGB). If the person making the declaration is not named in the request to participate, the request to participate will be deemed to have not been submitted.
- Self-Declaration MiLoG: Declaration as per Section 19 (3) MiLoG
- Self-declaration of suitability under Sections 123, 124 ARC: Self-declaration of possessing the knowledge pursuant to Sections 123, 124 GWB is incorrect and that the cases mentioned therein do not apply.